CaptainHook wrote:Resolve Lite won't use more than 1 card for GPU and since the 690 should show as 2 i don't think you will be getting the max benefit from that card with a quadro running GUI anyway?
Also, what motherboard in your hackintosh?
If the other slots share the x16 lane adding more cards may half it (x8) making it pointless anyway. I found that out the hard way as i have a Gigabyte Z77X-UD5H and i get the same results (fps) using my GTX580 as GPU and a GTX550ti for GUI as i do just using the 580 without the 550 plugged in (i assume since having the 550 in cripples the 580 by half).
Have you tried with just the 690 plugged in ?
My hunch is you could ditch the quadro 4000 completely (depending on your board and if you stay with Lite).
Asus z9pe d8 board and ya, I know about the shared pcie lanes, and no, I'm not sharing them (at least not where I need 16x)
I think I tried with only the 690 and it ran the same... Now I'm seeing a somewhat normal speeds when I close the WF display (had it open before, silly me). But still more often than not the GPU bar hits red, fps still tells me 24 but I actually see some lagging.