- Posts: 1
- Joined: Thu May 02, 2024 10:53 am
- Real Name: Ingemar Hägg
Thu May 02, 2024 11:08 am
Hi
I have seen some ATEM Constellations with problems on the MV3 output. Could maybe be seen on the AUX 19 and 23. Sometimes picture and sometimes not, regardless of resolution or S/W. It's a bad connection in one of the connectors inside. And for those that don't know anything about electricity, either do not open the unit or atleast remove it from the power outlet. It's solved by pushing firmly on the board that goes to connector J23 on the motherboard. Solved and have never been seen after.
Good luck.
Ingemar Hägg, Danmon Group Sweden.
I have seen some ATEM Constellations with problems on the MV3 output. Could maybe be seen on the AUX 19 and 23. Sometimes picture and sometimes not, regardless of resolution or S/W. It's a bad connection in one of the connectors inside. And for those that don't know anything about electricity, either do not open the unit or atleast remove it from the power outlet. It's solved by pushing firmly on the board that goes to connector J23 on the motherboard. Solved and have never been seen after.
Good luck.
Ingemar Hägg, Danmon Group Sweden.